Computer Control Peel Testing Machine HZ-1004

1.Computer Control Peel Testing Machine 2.Max load:1KN, 2KN 3.Accurate:1/0.5 grade 4.Max load:1/200000 5.3years warraty

Computer Control Peel Testing Machine

Equipment summary

Computer Control Peel Testing Machine is designed by our company which is made of  aluminum, it is not only small, used widely,do not take up space, nice appearance, but also easy to move with the hoop,  it is very convenient to operate. It is controlled by computer and printing out the testing report; The outward appearance used the closing board dealing with high-level baking varnish, which obviously elegant appear. It especially suitable for controlling quality in production line, This series of machine is mainly applied to test the non-metallic and metallic materials which the load is less than 2KN.

 

Main functions:

Computer Control Peel Testing Machine is applied to the flexible material in tension, tear, adhesive strength, peel (90 degrees and 180 degrees) and others, such as rubber, plastic, plastic film and others. It is equipped with extensometer which special used to measure the deformation of specimen, it suitable to test the large deformation of material .    

Main feature:  

Computer Control Peel Testing Machine adopted photoelectric encoder to measure the displacement, the controller uses the embedded single-chip microcomputer structure with multi-function software, which combined with measurement, control, culculation and storage. It can automatic calculate the stress, rate of elongation (need to add with extensometers), tensile strength, elastic modulus, automated statistical results; automatically recorded the biggest point, breaking point, the designated point value or the rate of elongation; Using computer to display the dynamic curves in the testing process and process the data, After testing, it can re-analysis and editing the data by amplifying the curves through the graphics processing module, printing reports, product performance reached the international advanced level.

 

Corresponding standard :

GB/T16491-1996  electronic universal testing machine

 

Technical parameter:

Model	HZ-1004 Computer Control Peel Testing Machine
Max load	1KN, 2KN, option
Accurate grade	1grade /0.5 grade
Effective measuring range	Force from 0.2% to 100% (1grade) / from 0.4% to 100% (0.5 grade)
Measuring accuracy	the value ±1% / the value±0.5%
Tester resolution	Max load 1/200000,constant the resolution
Load sensor	Basic configurationsensormax load: one
Effective testing width	450mm (can be increased the width according to customers requirement)
Effective tensile space	400, 500, 600mm (can be increased the space according to customers requirement)
Testing speed	From 0.001 to 500mm/min
Accruacy of displacement measurement	Tolerance: ±0.5% / tolerance: ±0.2%
Deformation of measured system (according to the requirements )	Min span :10mm, Max range of deformation 800mm Extended  deformation span: 25mm, 50mm, 100mm, range of deformation 5mm, 10mm, 25mm
Accuracy of measured deformation	Tolerance :±0.5% (according to requirement of customer to choose the larger or small deformation)
safety	Electronic-limit protection
Testing platform moving  device	Fast /slow ( two speeds to control),can jog
Return Back	Manual or automatic operation, After the test, the moving iron return to initial position with the highest speed by manual or automatic operation
Overload protection	Overload 10%, automatic protection
fixture	A set of tensile fixture
Machine size	620*320*2100mm(lenght*width*height)
Power system	Panasonic AC Servo Motor + Driver + high-precision ball screw
Power supply	220V, 50HZ
Power	0.2KW (depending on different demand of force, using different motor)
Machine weight	about 90 Kg

 

Computer Control Peel Testing Machine HZ-1004